What this engineer stamp is for
Your xstamper n53 texas engineer stamp identifies you on engineering work prepared for Texas. Under the board’s sealing procedures, a seal identifies the licensed engineer responsible for the work and the scope of that responsibility. The seal must be used with the required signature and date when final engineering work is released. Buying a seal does not establish licensure or authorize someone to seal work outside their responsibility.
The Texas board design and your licensed details
The Texas Board of Professional Engineers and Land Surveyors publishes the authorized seal design in its vendor instructions. It is round, with STATE OF TEXAS, a central star, your name and license number, and LICENSED PROFESSIONAL ENGINEER. Physical and electronic seals must be no larger than two inches in diameter, and the name and number must remain clearly legible (§137.31).
Use the name currently listed with the board: your given name, an accepted variation or initials, with your surname. Nicknames and titles such as Dr. or P.E. do not belong inside the seal. If you legally change your name, the rule requires a new seal. The preview updates as you type; the final layout follows the board’s illustrated format.
The Xstamper N53 pre-inked body
An Xstamper N53 stamp uses pre-inked, laser-engraved rubber. It does not use the replacement-pad accessory offered with the self-inking models. Use Xstamper refill ink for this body; its optional bottle contains 10 ml. To re-ink, remove the handle and place three to four drops into the central opening, then allow the ink to absorb overnight. Its oil-based ink is not suitable for glossy paper or Mylar.
How ordering works
Enter the name and number for your Xstamper N53 Texas engineer stamp, then choose from the nine ink options, including Dry. The available extras are the 10 ml Xstamper refill bottle and the digital file bundle. Add special instructions and quantity before checking your total.
Electronic sealing in Texas
Texas permits electronic seals and signatures under §137.35. Engineers may securely transmit a copy of properly sealed and signed hard-copy work, or create an electronic seal and signature for electronically formatted work. A seal image by itself is not an electronic signature or a document-security system. The engineer remains responsible for protecting the seal and signature files and applying them correctly.
Texas engineer seal questions
- Which refill goes with the Xstamper N53 Texas engineer stamp?
- Use Xstamper refill ink only. This page offers its 10 ml bottle and does not offer a self-inking replacement pad or a different refill ink.
- What name should appear on my Texas seal?
- Use the name currently listed with the Texas board: your given name, an accepted variation or initials, with your surname. Do not substitute a nickname or add a professional title inside the seal (§137.31(d)).
- How large may a Texas engineer seal be?
- Texas limits both physical and electronic seals to two inches in diameter. At any size, the licensed name and number must be legible (§137.31(b)).
- Can I preprint blank forms with my Texas seal?
- No. The board prohibits preprinting blank forms with an engineer’s seal and using decals or other seal replicas (§137.31(e)). Reproducing completed, sealed and signed original work is treated separately.